The 6.0L Power Stroke is known for having air restrictions that can seriously limit it’s power potential. Upgrading the turbo is a great first step, but all that new air still gets backed up in the restrictive intake manifold. ODAWGS DIESEL has solved that problem with our fully ported 6.0L intake manifolds that will allow your engine to get all the air it needs to make big power. By increasing the efficiency of the system, fully ported intakes will also increase your fuel economy! Unlike other ported intakes on the market, ODAWGS DIESEL casts our manifolds for perfect production every time. Casting eliminates all weld seams for a cleaner look and better performance. It also allows ODAWG to offer the most affordable fully ported 6.0L intake manifold on the market! With incredible attention to detail, this intake will add power, fuel economy, and good looks to any build! Fully cast design 100% Designed and Made in the USA Custom cast bungs on the top of the intake to ensure a 100% seal with an o-ring plug.
Optional Re-Route Kit: When you install the Odawgs s3r intake manifold, the coolant no longer runs through the stock location. This is a simple, yet effective way to re route the coolant, and keep you cool on the road.
This kit uses a special nylon Tee that is 3/4 inch on two ends and 5/8 inch in the middle, as the hose that connects to the oil cooler outlet is 5/8 inch but the heater core hose is 3/4 inch. Hose clamps keep everything secured and a HD nylon 3/8 inch 3-way Tee takes care of the degas bottle hose that use to connect to the coolant portion of the intake manifold. The hose used in this kit is not your normal Home Depot/Lowes/Ace Hardware heater hose. It is made out of HD silicone hose that is rated for 200 psi pressures and 350F temperatures.